Support Center

How to setup email alert function for motion detection?

2018-06-13 16:13:39 yeskamo Read

How to setup email alert function for motion detection?

1) Make sure the NVR system is ONLINE

Use Ethernet cable to connect NVR recorder with LAN port of home router to get the Cloud ID online.

Right click the mouse to enter main menu > system setup > network setup > network setup > enable DHCP > Cloud (P2P).

图片.png

2) Setup motion detection alert:

Right click mouse to enter main menu > system setup > channel setup > video detection> choose channel > enable motion> enable motion alert: Email> click apply to save the setting

图片.png

Please note:

system doesn’t support alarm function; NVR will give out sound of “dididididi” when you enable buzzer function.

3) Setup email function:

right click mouse with main menu > system setup > network setup > E-mail.

(Take xxx@hotmail.com as example, it is advised to use your hotmail address for this function)

Enable E-mail function

SMTP Provider: hotmail

SMTP Server: smtp.live.com

Port: 25 or 587

Encryption type: TLS

Sender: xxx@hotmail.com

Password: password of your mail xxx@hotmail.com

Sendee: here you can use another mail address or use sender: xxx@hotmail.com

Please first “test” to see whether the setup successful, if fail, please contact us: yeskamservice@hotmail.com

图片.png

4) Set up phone app notification

Enter your app account > me > alarm setting > enable notification, and you’ll receive pushing notification when movement is detected.

(For detailed instruction, please refer to: http://www.yeskamo.com/information/shownews.php?lang=en&id=134)